20oz sublimation travel mug (Multi-pack)
Click here for a template
This leakproof, insulated travel mug is the perfect solution for those always on the go! It can hold hot and cold drinks and comes with a screw-on lid which can be used with or without a straw (straw included).These are double-walled and will keep your drinks boiling hot for 3-4 hours, after which you can start drinking!This tumbler comes with a convenient to hold strap. It is not a wrist strap as it's only about 7.5cm long so you wouldn't be able to put an adult's hand through it.
Features:- Leakproof screw-on lid- Double-walled design - BPA free- Stainless steel
Material: Stainless steel
Size: 20oz
Height (without lid) 17.5cm Diameter (top) 9cm
Lid type: Screw-on
Available colours:- White
Suitable for hot and cold drinksDo not use the plastic straw for hot drinks
Equipment required: air fryer/ convection oven / halogen oven
Pressing instructions:
Convection oven: 356F, 4min (rotating half-way through)
Flat bottom 20oz sublimation tumbler
Please note that the metal straws and brushes are NOT to be purchased seperately.
Features:- Leakproof lid- Double walled - Straight design- Flat bottom
Material: Stainless steel
Size: 20oz, approx 20.5cm x 7.3cm
Lid type: Push-on
With this tumbler, you will get high-quality prints!
Finish: Glossy
Suitable for hot and cold drinksDo not use the plastic straw with hot drinks
Pressing instructions:
Tumbler press: 180C, 60sec
Convection oven: 185C, 4min
20oz sublimation tumbler - Flat Edge (Multi-pack)
Please note that the metal straws and brushes are NOT to be purchased seperately.
Features:- Leakproof push-on lid- Double-walled design - BPA free- Stainless steel- Flat bottom for a better printing experience
Material: Stainless steel, plastic
Size: 20.5cm x 7.3cm
Capacity: 20oz
Finish: Glossy
Pressing instructions:
20oz sublimation water bottle
This leakproof water bottle is the perfect product for those who are always on the move!It comes with a very comfortable to hold silicone handle and a dust cover to protect the flip straw.
This bottle is insulated which means it will keep your drinks cold for longer.Not suitable for hot drinks due to the plastic straw.
Material: Stainless steel
Size: 20oz
Finish: Glossy
Lid type: Screw-on
Suitable for:- Sublimation (all colours)- Vinyl- UV DTF
Equipment required: Convection oven
Pressing instructions:180C, 4min
WARNING!!Use protective equipment as necessary. We recommend using heat-resistant gloves as some of the products might be very hot after sublimation.
Occasional small blemishes may appear on any of the products, which is normal and happens due to small dust particles getting attached to the surface during the coating process.
20oz sublimation water bottle (Multipack)
This leakproof water bottle is the perfect product for those who are always on the move!It comes with a very comfortable to hold silicone handle and a dust cover to protect the flip straw.
This bottle is insulated which means it will keep your drinks cold for longer.Not suitable for hot drinks due to the plastic straw.
Material: Stainless steel
Size: 20oz
Finish: Glossy
Lid type: Screw-on
Suitable for:- Sublimation (all colours)- Vinyl- UV DTF
Equipment required: Convection oven
Pressing instructions:180C, 4min
WARNING!!Use protective equipment as necessary. We recommend using heat-resistant gloves as some of the products might be very hot after sublimation.
Occasional small blemishes may appear on any of the products, which is normal and happens due to small dust particles getting attached to the surface during the coating process.
24x 16oz frosted beer mug
Comes with FREE shipping
All beer mugs are packed in twos. Therefore, you will receive 12 boxes of 2-pack beer mugs, total 24 beer mugs.
Material: GlassSize: 16ozEquipment required: convection oven / mug pressSuitable for: - Sublimation - Vinyl - UV DTF
Pressing instructions:
Mug / Tumbler press: 180C, 3min
Convection oven: 180C, 4minWARNING!!Use protective equipment as necessary. We recommend using heat-resistant gloves as the product will be very hot after the sublimation.Hand washing only.As with all glass products, avoid extreme temperature changes, as this may cause cracking or even explosion of the glass.
Occasional small blemishes may appear on any of the products, which is normal and happens due to small dust particles getting attached to the surface during the coating process.
2x 16oz frosted beer mug
Material: GlassSize: 16ozEquipment required: convection oven / mug pressSuitable for: - Sublimation - Vinyl - UV DTF
Pressing instructions:
Mug / Tumbler press: 180C, 3min
Convection oven: 180C, 4minWARNING!!Use protective equipment as necessary. We recommend using heat-resistant gloves as the product will be very hot after the sublimation.Hand washing only.As with all glass products, avoid extreme temperature changes, as this may cause cracking or even explosion of the glass.
Occasional small blemishes may appear on any of the products, which is normal and happens due to small dust particles getting attached to the surface during the coating process.
Upgraded 30oz Sublimation Tumbler with swing handle
Click here for a bulk-buy option.
30oz leakproof sublimation tumbler with secure screw-on lid, swing carry handle, and double-wall stainless-steel design. Premium sublimation coating ensures consistent, high-quality prints. Ideal for hydration-focused product lines, corporate branding, and volume production.
This bottle is insulated which means it will keep your drinks cold for longer.
This is an upgraded version of our 30oz sublimation tumblers:✅ Higher quality coating✅ Upgraded lid✅ Leakproof design
No more greyish look or lost rubber stoppers.
Click here for a template
Not suitable for hot drinks due to a plastic straw
Material: Stainless steel
Size: 30oz
Lid type: Screw-on
Available colours:-WhitePlease be aware that the colours may vary slightly depending on the lighting and the settings of your device' screen.
Suitable for:- Sublimation - Vinyl- UV DTFEquipment required: 30oz tumbler press / 3d vacuum oven / convection oven
Pressing instructions:
Tumbler press: 356F, 60sec
Convection oven: 375F, 6minPlease be aware that the colours of the design may show slightly different on the coloured products.WARNING!!Use protective equipment as necessary. We recommend using heat-resistant gloves as some of the products might be very hot after sublimation.
Occasional small blemishes may appear on any of the products, which is normal and happens due to small dust particles getting attached to the surface during the coating process.Please note that any orders that include a mix of both, ready-to-ship as well as pre-order items, will be dispatched once all items from your order are available.
30oz Sublimation Tumbler with swing handle (Multi-pack)
30oz leakproof sublimation tumbler with secure screw-on lid, swing carry handle, and double-wall stainless-steel design. Premium sublimation coating ensures consistent, high-quality prints. Ideal for hydration-focused product lines, corporate branding, and volume production.
This bottle is insulated which means it will keep your drinks cold for longer.
This is an upgraded version of our 30oz sublimation tumblers:✅ Higher quality coating✅ Upgraded lid✅ Leakproof design
No more greyish look or lost rubber stoppers.
Click here for a template
Not suitable for hot drinks due to a plastic straw
Material: Stainless steel
Size: 30oz
Lid type: Screw-on
Available colours:-WhitePlease be aware that the colours may vary slightly depending on the lighting and the settings of your device' screen.
Suitable for:- Sublimation - Vinyl- UV DTFEquipment required: 30oz tumbler press / 3d vacuum oven / convection oven
Pressing instructions:
Tumbler press: 356F, 60sec
Convection oven: 375F, 6minPlease be aware that the colours of the design may show slightly different on the coloured products.WARNING!!Use protective equipment as necessary. We recommend using heat-resistant gloves as some of the products might be very hot after sublimation.
Occasional small blemishes may appear on any of the products, which is normal and happens due to small dust particles getting attached to the surface during the coating process.Please note that any orders that include a mix of both, ready-to-ship as well as pre-order items, will be dispatched once all items from your order are available.
3in1 mini heat press PYD Life
For straw wrapping tool please click here
Features:- Compact size- 3 attachments (flat bed, cap and pen)- Lower electricity consumption than big presses- Perfect for smaller crafts (logos, pens, caps, keyrings, etc.)
Size: approx. W20cm x D44cm x H36cm
Voltage: 220V
Temp Range: 0-250℃
Time Range: 0-999s
What’s included:1x mini heat press1x flat bed attachment1x cap attachment1x pen attachment1x UK plug1x User Manual
We offer a 12-month warranty on this heat press.
Please note that the pen attachment allows you to sublimate small patterns such as logos rather than a full wrap.
Small window boxes, perfect for 50mm x 50mm fridge magnets
Material: Paper, plastic
Size: 5.5cm x 5.5cm x 2.5cm
What’s included:50x small window box
The ribbon or anything else visible on any of the photos are NOT included.
These come flat, for you to assemble.
Please note that due to the size of these the window film may sometimes not be fully glued on or not be entirely straight. This can be simply fixed with scissors and glue.
