20oz sublimation tumbler with handle REDUCED TO CLEAR Click here for a tutorial and make sure to hit the Subscribe button! Introducing our 20oz Stanley-style cups with handle! These insulated stainless steel cups are perfect for keeping your drinks at the desired temperature for longer. With a convenient handle, you can easily carry them around wherever you go. Available in a range of vibrant colours, these cups are ideal for sublimation and vinyl printing. Get creative and personalize your own unique 20oz cup today! All colours are suitable for sublimation. Remember to take off the handle before sublimating!Coloured cups are matte and the white one is glossy. These come with screw-on lids and a plastic straw.Material: Stainless steel Size: 20ozApproximate measurements:8.6 diameter (top)7.5cm diameter (bottom)17.2cm height (without the lid) Lid type: Screw-on Available colours:- Green- Orange- White (gloss)- Purple- Turquoise- PinkPlease be aware that the colours may vary slightly depending on the lighting and the settings of your device' screen. Suitable for hot and cold drinksDo not use the plastic straw for hot drinks Suitable for:- Sublimation (all colours)- Vinyl- UV DTF- Laser engravingEquipment required for sublimation: Mug press / 3d vacuum oven / convection oven Pressing instructions: Mug press: 356F, 60sec Convection oven: 185C, 4minPlease be aware that the colours of the design may show slightly different on the coloured products.WARNING!!Use protective equipment as necessary. We recommend using heat-resistant gloves as some of the products might be very hot after sublimation. Occasional small blemishes may appear on any of the products, which is normal and happens due to small dust particles getting attached to the surface during the coating process.

Read more less

Flat bottom 20oz sublimation tumbler Please note that the metal straws and brushes are NOT to be purchased seperately. Features:- Leakproof lid- Double walled - Straight design- Flat bottom  Material: Stainless steel Size: 20oz, approx 20.5cm x 7.3cm Lid type: Push-on With this tumbler, you will get high-quality prints! Finish: Glossy Suitable for hot and cold drinksDo not use the plastic straw with hot drinks Pressing instructions: Tumbler press: 180C, 60sec Convection oven: 185C, 4min

Read more less

16oz stainless steel sublimation can Comes with a matching lid and plastic straw. All colours are suitable for sublimation. If you want to add coloured lids to the white can, click hereMaterial: Stainless steel Size: 16oz Approx. measurements15cm height 7.8cm diameter Printing area: 12.5cm x 24.7cm Lid type: Push-on Do not use the plastic straw for hot drinks Tutorial link Equipment required: Convection oven / air fryer Pressing instructions: Convection oven: 185C, 6min Suitable for:- Sublimation - Vinyl- UV DTFWARNING!!Use protective equipment as necessary. We recommend using heat-resistant gloves as some of the products might be very hot after sublimation. Occasional small blemishes may appear on any of the products, which is normal and happens due to small dust particles getting attached to the surface during the coating process.

Read more less

12oz sublimation tumbler - straight tumbler with arc bottom Also available in 15oz and 20ozEach tumbler comes with a clear plastic straw and a rubber pad This tumbler is insulated which means it will keep your drinks cold/hot for longer. Material: Stainless steel Size: 12oz Approx. measurements13.2cm height 23.3cm circumference Lid type: Push-on Available colours:- White Suitable for hot and cold drinksDo not use the plastic straw with hot drinks Equipment required: Tumbler heat press / 3d vacuum oven Pressing instructions: Tumbler press: 356F, 60sec Convection oven: 375F, 6min Suitable for:- Sublimation- Vinyl- UV DTF

Read more less

40oz sublimation tumbler (Gen 2.0) Now sold at £7.40/pc due to the frequent appearance of small blemishes / defects on the cups. Examples shown on the photos, but please note these are not limited to those shown and your cups may have some other faults or they may not have any at all. We are unable to go through every single cup we currently have in stock and purchasing these, you are doing so with a full awareness of the potential faults. No refunds or returns will be accepted on these. REDUCED TO CLEAR Each cup comes with a plastic straw. This tumbler is insulated which means it will keep your drinks cold for longer. Or click here for bulk-buy options Designs seen on the sample products are from https://www.creativefabrica.com/ref/924408/ Pair it with our 20oz cup with handle! Material: Stainless steel + plastic Size: 40oz Lid type: Screw-on Available colours:- White gloss Suitable for hot and cold drinksDo not use the plastic straw with hot drinks Pressing instructions for the sublimation cup Tumbler press: 180C, 60sec Convection oven: 180C, 4min In case the screws get stuck, use a small, flat object to leverage the screw while unscrewing the handle. Suitable for:- Sublimation (all colours)- Vinyl- UV DTFWARNING!!Use protective equipment as necessary. We recommend using heat-resistant gloves as some of the products might be very hot after sublimation. Occasional small blemishes may appear on any of the products, which is normal and happens due to small dust particles getting attached to the surface during the coating process.

Read more less

20oz sublimation travel mug Click here for a template This leakproof, insulated travel mug is the perfect solution for those always on the go! It can hold hot and cold drinks and comes with a screw-on lid which can be used with or without a straw (straw included).This tumbler comes with a convenient to hold strap. It is not a wrist strap as it's only about 7.5cm long so you wouldn't be able to put an adult's hand through it. Material: Stainless steel These are double-walled and will keep your drinks boiling hot for 3-4 hours, after which you can start drinking! Size: 20oz Height (without lid) 17.5cm Diameter (top) 9cm Lid type: Screw-on Available colours:- White Suitable for hot and cold drinksDo not use the plastic straw for hot drinks Equipment required: air fryer/ convection oven / halogen oven Pressing instructions: Convection oven: 356F, 4min (rotating half-way through)WARNING!!Use protective equipment as necessary. We recommend using heat-resistant gloves as some of the products might be very hot after sublimation.Occasional small blemishes may appear on any of the products, which is normal and happens due to small dust particles getting attached to the surface during the coating process.

Read more less

20oz leakproof sublimation cups Features:- Leakproof lids (you can take them with you wherever you go!)- Built-in straw (no need to carry one around with you)- Double-walled design (keeps your drinks cool for longer) Cold drinks only!Not suitable for hot drinks due to the built-in plastic straw Material: Stainless steel, plastic Capacity: 20oz Lid type: Screw-on Available colours:- White - White + Pink - White + Black Finish: Glossy / Shimmer Pressing instructions: Convection oven: 185C, 4minWARNING!!Use protective equipment as necessary. We recommend using heat-resistant gloves as some of the products might be very hot after sublimation.

Read more less

16oz stainless steel sublimation tall can LAST STOCK! Unfortunately, our supplier has stopped producing these and therefore, there will be no more restocks. This sublimation can comes with a clear lid and a clear plastic straw. For coloured lids and straws please click here You can also purchase sublimation straws hereMaterial: Stainless steel Size: 16oz Approx. measurements16.5cm height 7.2cm diameter Printing area: 14.5cm x 23.3cm Lid type: Push-on Do not use the plastic straw for hot drinks Equipment required: Convection oven / air fryer Pressing instructions: Convection oven: 185C, 6min Suitable for:- Sublimation - Vinyl- UV DTFWARNING!!Use protective equipment as necessary. We recommend using heat-resistant gloves as some of the products might be very hot after sublimation. Occasional small blemishes may appear on any of the products, which is normal and happens due to small dust particles getting attached to the surface during the coating process.

Read more less

16oz insulated sublimation cold cup / hot cup Click here for a template - you will need an A3 printer to do a full wrap Material: Stainless steel, double-walled Size: 16oz, approx H18cm x W30cm , tapered Lid type: Screw-on Available colours:- White (comes with a metal straw and a straw brush) Finish: Glossy Suitable for hot and cold drinks Tutorial link Pressing instructions: Convection oven / Air fryer: 185C, 4min Suitable for:- Sublimation - Vinyl- UV DTFWARNING!!Use protective equipment as necessary. We recommend using heat-resistant gloves as some of the products might be very hot after sublimation. Occasional small blemishes may appear on any of the products, which is normal and happens due to small dust particles getting attached to the surface during the coating process.

Read more less

15oz sublimation tumbler - Flat Edge Each tumbler comes with a plastic straw and a rubber pad Features:- Leakproof push-on lid- Straight skinny design- Flat edge - Double-walled - BPA free- Stainless steel Material: Stainless steel Size: 15oz Approx. measurements16.6cm height 23.3cm circumference Lid type: Push-on Available colours:- White (comes with a plastic straw) Suitable for hot and cold drinksDo not use the plastic straw with hot drinksEquipment required: Convection oven / 3d vacuum oven Pressing instructions: Convection oven: 375F, 6min Suitable for:- Sublimation - Vinyl- UV DTF

Read more less

Pack of 10 x 16oz stainless steel sublimation tall can LAST STOCK! Unfortunately, our supplier has stopped producing these and therefore, there will be no more restocks. These sublimation cans come with a clear lid and a clear plastic straw each. For coloured lids and straws please click here You can also purchase sublimation straws hereMaterial: Stainless steel Size: 16oz Approx. measurements16.5cm height 7.2cm diameter Printing area: 14.5cm x 23.3cm Lid type: Push-on Equipment required: Convection oven / air fryer Do not use the plastic straw for hot drinks Pressing instructions: Convection oven: 185C, 6min Suitable for:- Sublimation - Vinyl- UV DTFWARNING!!Use protective equipment as necessary. We recommend using heat-resistant gloves as some of the products might be very hot after sublimation.

Read more less

Upgraded 30oz Sublimation Tumbler with swing handle Click here for a bulk-buy option. 30oz leakproof sublimation tumbler with secure screw-on lid, swing carry handle, and double-wall stainless-steel design. Premium sublimation coating ensures consistent, high-quality prints. Ideal for hydration-focused product lines, corporate branding, and volume production. This bottle is insulated which means it will keep your drinks cold for longer. This is an upgraded version of our 30oz sublimation tumblers:✅ Higher quality coating✅ Upgraded lid✅ Leakproof design No more greyish look or lost rubber stoppers. Click here for a template Not suitable for hot drinks due to a plastic straw Material: Stainless steel Size: 30oz Lid type: Screw-on Available colours:-WhitePlease be aware that the colours may vary slightly depending on the lighting and the settings of your device' screen. Suitable for:- Sublimation - Vinyl- UV DTFEquipment required: 30oz tumbler press / 3d vacuum oven / convection oven Pressing instructions: Tumbler press: 356F, 60sec Convection oven: 375F, 6minPlease be aware that the colours of the design may show slightly different on the coloured products.WARNING!!Use protective equipment as necessary. We recommend using heat-resistant gloves as some of the products might be very hot after sublimation. Occasional small blemishes may appear on any of the products, which is normal and happens due to small dust particles getting attached to the surface during the coating process.Please note that any orders that include a mix of both, ready-to-ship as well as pre-order items, will be dispatched once all items from your order are available.

Read more less