Pack of 10 x 16oz stainless steel sublimation tall can LAST STOCK! Unfortunately, our supplier has stopped producing these and therefore, there will be no more restocks. These sublimation cans come with a clear lid and a clear plastic straw each. For coloured lids and straws please click here You can also purchase sublimation straws hereMaterial: Stainless steel Size: 16oz Approx. measurements16.5cm height 7.2cm diameter Printing area: 14.5cm x 23.3cm Lid type: Push-on Equipment required: Convection oven / air fryer Do not use the plastic straw for hot drinks Pressing instructions: Convection oven: 185C, 6min Suitable for:- Sublimation - Vinyl- UV DTFWARNING!!Use protective equipment as necessary. We recommend using heat-resistant gloves as some of the products might be very hot after sublimation.

Read more less

16x 40oz Gen 2 white sublimation dupe Now sold at £7.50/pc due to the frequent appearance of blemishes / defects on the cups. Examples shown on the photos, but please note these are not limited to those shown and your cups may have some other faults or they may not have any at all. We are unable to go through every single cup we currently have in stock and purchasing these, you are doing so with a full awareness of the potential faults. No refunds or returns will be accepted on these. REDUCED TO CLEAR Features:- Spill-proof screw-on lid- Double-walled design - BPA free- Stainless steel- Improved design for higher comfort Material: Stainless steel, plastic Size: 24.5cm x 9.9cm (excl. lid and handles) Capacity: 40oz Finish: Glossy What’s included: 16x 40oz Gen 2 white sublimation dupe16x Plastic straw Pressing instructions:

Read more less

24x 16oz frosted beer mug Comes with FREE shipping All beer mugs are packed in twos. Therefore, you will receive 12 boxes of 2-pack beer mugs, total 24 beer mugs. Material: GlassSize: 16ozEquipment required: convection oven / mug pressSuitable for:  - Sublimation - Vinyl - UV DTF Pressing instructions: Mug / Tumbler press: 180C, 3min Convection oven: 180C, 4minWARNING!!Use protective equipment as necessary. We recommend using heat-resistant gloves as the product will be very hot after the sublimation.Hand washing only.As with all glass products, avoid extreme temperature changes, as this may cause cracking or even explosion of the glass. Occasional small blemishes may appear on any of the products, which is normal and happens due to small dust particles getting attached to the surface during the coating process.

Read more less

20oz sublimation tumbler - Flat Edge (Multi-pack) Please note that the metal straws and brushes are NOT to be purchased seperately. Features:- Leakproof push-on lid- Double-walled design - BPA free- Stainless steel- Flat bottom for a better printing experience Material: Stainless steel, plastic Size: 20.5cm x 7.3cm Capacity: 20oz Finish: Glossy Pressing instructions:

Read more less

15oz sublimation tumbler - Flat Edge (Multi-pack) Each tumbler comes with a plastic straw and a rubber pad Features:- Leakproof push-on lid- Straight skinny design- Flat edge - Double-walled - BPA free- Stainless steel Material: Stainless steel, plastic Size: 16.5cm x 7.3cm Capacity: 15oz Finish: Glossy Pressing instructions:

Read more less

12oz sublimation tumbler (Multi-pack) Features:- Leakproof push-on lid- Double-walled design - BPA free- Stainless steel Each tumbler comes with a clear plastic straw and a rubber pad. Suitable for hot and cold drinksDo not use the plastic straw with hot drinks Material: Stainless steel, plastic (lid & straw) Size: 13cm x 7.3cm Capacity: 12oz Finish: Glossy Suitable for:- Sublimation- Vinyl- UV DTF Pressing instructions:

Read more less

20oz sublimation travel mug (Multi-pack) Click here for a template This leakproof, insulated travel mug is the perfect solution for those always on the go! It can hold hot and cold drinks and comes with a screw-on lid which can be used with or without a straw (straw included).These are double-walled and will keep your drinks boiling hot for 3-4 hours, after which you can start drinking!This tumbler comes with a convenient to hold strap. It is not a wrist strap as it's only about 7.5cm long so you wouldn't be able to put an adult's hand through it. Features:- Leakproof screw-on lid- Double-walled design - BPA free- Stainless steel Material: Stainless steel Size: 20oz Height (without lid) 17.5cm Diameter (top) 9cm Lid type: Screw-on Available colours:- White Suitable for hot and cold drinksDo not use the plastic straw for hot drinks Equipment required: air fryer/ convection oven / halogen oven Pressing instructions: Convection oven: 356F, 4min (rotating half-way through)

Read more less

SubiBears® 40cm Sublimation Plush Bunny (Multi-pack) Soft as a cloud and twice as cuddly — our premium plush bunnies are crafted with care for maximum snuggles. Perfect for all ages, each bunny is a bundle of joy, love, and luxurious fluff. Suitable from birth.Tested to the UKCA standard Bunny-eared bags sold separately Material: 100% Polyester Size: 40cm head to feet / 30cm sittingEars 20cm x 8cm Available Colours:- Cream / Off-white These come completely blank for you to personalise, any personalisation visible in the photos is for presentation purposes only Suitable for SublimationTemperature 185CTime 50sec Suitable for HTV / DTFPlease follow the HTV/DTF provider's instructions for temperature and time for pressingPlease note that only the inside of ears and feet can be personalised

Read more less

16oz stainless steel sublimation can (Multi-pack Each can comes with a matching lid and plastic straw (unless otherwise stated). All colours are suitable for sublimation. If you want to add coloured lids to the white can, click hereMaterial: Stainless steel Size: 16oz Approx. measurements15cm height 7.8cm diameter Printing area: 12.5cm x 24.7cm Lid type: Push-on Do not use the plastic straw for hot drinks Tutorial link Equipment required: Convection oven / air fryer Pressing instructions: Convection oven: 185C, 6min Suitable for:- Sublimation - Vinyl- UV DTF

Read more less

Sublimation Bunny-eared bags THIS IS A BAG ONLY! These Bunny-eared bags are so much thicker than those of other suppliers! You can recognise this higher quality version by the differently sawn ears. Material: Linen/PolyesterSize: H25cm x W30cm x D20cmEquipment required: Flat heat pressSuitable for: - Sublimation- HTV Pressing instructions: Heat Press: 365F, 60sec

Read more less