Materials for 50mm fridge magnet maker (Multi-pack) Each pack comes with FREE delivery This listing is for materials for our 50mmx50mm magnet maker Click here for MDF ornament frames Click here for A4 magnet display frames This product is compatible with our 50mmx50mm fridge magnet maker Please note that these materials may not be compatible with any other magnet makers than those sold by us. If you haven't purchased our magnet maker but would like to purchase the materials, you are doing so at your own risk being fully aware that these may not be compatible with your magnet maker purchased from elsewhere. And therefore, you will not be entitled to a refund if there are any issues with the materials as this could be due to the incompatibility. 

Read more less

MDF & Plywood sublimation blanks Available Shapes & Sizes: Plywood placemat (16x30x0.5cm) NOT A CHOPPING BOARD - Remove protective foil 15cm Plywood square photo panel (15.2x15.2x1.5cm) 20cm Plywood square photo panel (20.3x20.3x1.5cm) Puzzle 1 (16.8x17.2x1.5cm) Puzzle 2 (26.6x18x1.5cm) 15cm heart photo panel (15.2x15.2x1.5cm) 20cm heart photo panel (20.3x20.3x1.5cm) 15cm square photo panel (15.2x15.2x1.5cm) 20cm square photo panel (20.3x20.3x1.5cm) Bone photo panel (25.4x12.7x1.5cm) Please allow for +/- 3mm error in measurements Each item is for decorative purposes only! The puzzle shapes are stand-alone pieces and do not connect together. Please inspect each item BEFORE taking the protective foil off. Please report any issues asap to info@sub-blanks.co.uk Suitable for:- Sublimation- UV DTF Equipment required: Flat-bed heat press Pressing instructions:180C, 150s for all 1.5cm blanks 180C, 60sec for 0.5cm Plywood placemat WARNING!!Use protective equipment as necessary. We recommend using heat-resistant gloves as some of the products might be very hot after sublimation. Occasional small blemishes may appear on any of the products, which is normal and happens due to small dust particles getting attached to the surface during the coating process.

Read more less

Nowhere to display your magnets? No problem! You can now purchase these metal stickers and display your magnets anywhere in your home! Material: Metal with 3M self-adhesive backing Colour: Gloss white Size:2.5cm x 3cm (rectangles)2.5cm x 19cm (strips) Please note that due to hand cutting the pieces / strips may not be completely straight which DOES NOT affect the product's performance.  Cut into specific sizes to ensure the tape is not visible once a magnet is attached.Small rectangles are designed to hold 1 magnet per piece.Strips are designed to hold 4 magnets.

Read more less

Pack of 10 Sublimation Straw toppers Straw toppers with sublimation inserts for 1cm wide straws Round and heart-shaped toppers are double-sided. The flower-shaped one is single sided. Available colours: Heart-shaped- White- Pink- Blue- Green Round- White- Pink- Blue- Green Flower-shape- Pink- Blue- Green Material: Silicon with metal insert Equipment Required: Flat Heat press Pressing instructions: Temp 180CTime 60 sec Remember to take the protective foil off the insert WARNING!!Use protective equipment as necessary. We recommend using heat-resistant gloves as some of the products might be very hot after sublimation.

Read more less

Pack of 25 Sublimation tote bags Check this video of a sublimated Trick or Treat tote. Make sure to subscribe to this channel as there will be some tutorials being added! ☝ Click here to buy an amazing quality DTF! Material: Linen/PolyesterColour: Off whiteSize: 40cm x 37cmEquipment required: Flat heat pressSuitable for: - Sublimation- HTV Pressing instructions: Heat Press: 365F, 60sec

Read more less

Pre-order Fridge magnet maker set This is a Pre-Order Arriving: w/c 9th February  The magnet maker and materials MUST be purchased from the same company to ensure compatibility. Click here for materials Click here for the ornament frames In this set you will get:1x Fridge magnet making machine1x Paper cutter to cut out the photos100x material sets to make 100 fridge magnets (50mmx50mm) 1x FREE pack of paper1x FREE template Features:✨Easy to operate ✨Low production cost ✨Durable metal maker and paper cutter ✨High-quality finished product ✨High profit margins✨No assembly required  No import fees and no long delivery times! Shopping with us you can be certain of the quality and compatibility of our products. You don't have to be paying high import fees or be waiting weeks on end just to receive the wrong product or wrong materials that aren't even compatible with your maker which tends to be the case with overseas companies! Shopping with us, you can rest assured, you'll always receive exactly what you're paying for and receive your order within 2 working days. If you'd like to ask any questions to others who bought this maker from us in the past, feel free to do so in our Facebook group https://www.facebook.com/groups/1556231971411991 You can make about 5 magnets per minute making about £2* profit per magnet with this magnet maker. This machine DOES NOT need sublimation. You simply print a photo paper with a standard inkjet printer, cut it out with the paper cutter provided and assemble together with the machine. To make these fridge magnets you will need 115gsm photo paper but we will send you a pack for free in your first order.  You will also receive a free template which allows you to print 8 photos on 1 A4 page. *Profit calculated based on a £3 selling price sold directly to customers. Profit will vary depending on the price sold and channel used to sell it. We've got plenty of materials in stock, available under different listings. Please note that purchasing materials from a different seller you are waiving your right to any refund / return / replacement / repair of the magnet maker as using materials that are not compatible with this maker can cause damage to it.

Read more less

These large MDF blanks will make the perfect gift for Easter or as home decor. Pre-order discountPre-ordering these, you are only paying £6 per bunny and £7.20 per egg.Once in stock, the price will revert back to the original prices shown in this listing. Multi-buy discountBuying 10 or more of these MDF frames, you are saving an extra 5% (also applicable to pre-orders). This is a pre-order. Expected delivery: end of February YOU MUST PURCHASE THESE SEPARATELY FROM ANY IN-STOCK ITEMS! Available shapes and sizes:Bunny 21x38x1.5cmEgg 27x38x1.5cm Please note that these are quite big and heavy. The bunny weighs around 600g and the egg weighs around 1kg! Both come with a rope and 2 hinges for hanging (need to be attached after sublimation). These can also be used as a standing decoration leaned against a wall. Each item is for decorative purposes only! Please inspect each item BEFORE taking the protective foil off. Please report any issues asap to info@sub-blanks.co.uk Suitable for:- Sublimation- UV DTF Equipment required: Flat-bed heat press Pressing instructions:180C, 150s WARNING!!Use protective equipment as necessary. We recommend using heat-resistant gloves as some of the products might be very hot after sublimation.

Read more less

Straw wrapping tool PYD Life Click here for sublimation straws Light weight wrapping tool for sublimation straws and pens with a ruler printed along each holding slot going up to 32cm.  This tool comes with 3 different slots each measuring 0.8cm, 1cm and 1.2cm in diameter. Material: EVA Size: 33cm x 15cm

Read more less

SubiBears® 40cm Sublimation Plush Bunny Soft as a cloud and twice as cuddly — our premium plush bunnies are crafted with care for maximum snuggles. Perfect for all ages, each bunny is a bundle of joy, love, and luxurious fluff. Suitable from birth.Tested to the UKCA standard Bunny-eared bags sold separately Material: 100% Polyester Size: 40cm head to feet / 30cm sittingEars 20cm x 8cm Available Colours:- Cream / Off-white These come completely blank for you to personalise, any personalisation visible in the photos is for presentation purposes only Suitable for SublimationTemperature 185CTime 50sec Suitable for HTV / DTFPlease follow the HTV/DTF provider's instructions for temperature and time for pressingPlease note that only the inside of ears and feet can be personalised

Read more less

SubiBears® 40cm Sublimation Plush Bunny (Multi-pack) Soft as a cloud and twice as cuddly — our premium plush bunnies are crafted with care for maximum snuggles. Perfect for all ages, each bunny is a bundle of joy, love, and luxurious fluff. Suitable from birth.Tested to the UKCA standard Bunny-eared bags sold separately Material: 100% Polyester Size: 40cm head to feet / 30cm sittingEars 20cm x 8cm Available Colours:- Cream / Off-white These come completely blank for you to personalise, any personalisation visible in the photos is for presentation purposes only Suitable for SublimationTemperature 185CTime 50sec Suitable for HTV / DTFPlease follow the HTV/DTF provider's instructions for temperature and time for pressingPlease note that only the inside of ears and feet can be personalised

Read more less

High-quality sublimation gift boxes Available in the below sizes:Please note that those sizes are of the actual space available inside the boxes, this excludes the handles, ears etc. 9x9x9cm (small candy box) 9x9x8cm (small box with ears) 15.4x15.4x11cm (with window) 18x13x25cm (with window) 8x7.5x26.5cm (20oz tumbler box) 27.5x10x18cm (40oz box) Please note that although the 40oz dupe fits in the box, the straw is too long to fit. Equipment required:Flat heat press Pressing instructions:Temp: 180CTime 60 sec These boxes need double-sided tape to assemble, please only attach it AFTER sublimation.

Read more less

Sublimation pens (Multi-pack) Ink colour: Black Equipment required:Air fryer/ Oven / Pen press Pressing Instructions:Air fryer/ OvenTemp: 185CTime 4min Occasional small blemishes may appear on any of the products, which is normal and happens due to small dust particles getting attached to the surface during the coating process.

Read more less