20oz sublimation tumbler with handle REDUCED TO CLEAR Click here for a tutorial and make sure to hit the Subscribe button! Introducing our 20oz Stanley-style cups with handle! These insulated stainless steel cups are perfect for keeping your drinks at the desired temperature for longer. With a convenient handle, you can easily carry them around wherever you go. Available in a range of vibrant colours, these cups are ideal for sublimation and vinyl printing. Get creative and personalize your own unique 20oz cup today! All colours are suitable for sublimation. Remember to take off the handle before sublimating!Coloured cups are matte and the white one is glossy. These come with screw-on lids and a plastic straw.Material: Stainless steel Size: 20ozApproximate measurements:8.6 diameter (top)7.5cm diameter (bottom)17.2cm height (without the lid) Lid type: Screw-on Available colours:- Green- Orange- White (gloss)- Purple- Turquoise- PinkPlease be aware that the colours may vary slightly depending on the lighting and the settings of your device' screen. Suitable for hot and cold drinksDo not use the plastic straw for hot drinks Suitable for:- Sublimation (all colours)- Vinyl- UV DTF- Laser engravingEquipment required for sublimation: Mug press / 3d vacuum oven / convection oven Pressing instructions: Mug press: 356F, 60sec Convection oven: 185C, 4minPlease be aware that the colours of the design may show slightly different on the coloured products.WARNING!!Use protective equipment as necessary. We recommend using heat-resistant gloves as some of the products might be very hot after sublimation. Occasional small blemishes may appear on any of the products, which is normal and happens due to small dust particles getting attached to the surface during the coating process.

Read more less

40oz sublimation tumbler (Gen 2.0) Now sold at £7.40/pc due to the frequent appearance of small blemishes / defects on the cups. Examples shown on the photos, but please note these are not limited to those shown and your cups may have some other faults or they may not have any at all. We are unable to go through every single cup we currently have in stock and purchasing these, you are doing so with a full awareness of the potential faults. No refunds or returns will be accepted on these. REDUCED TO CLEAR Each cup comes with a plastic straw. This tumbler is insulated which means it will keep your drinks cold for longer. Or click here for bulk-buy options Designs seen on the sample products are from https://www.creativefabrica.com/ref/924408/ Pair it with our 20oz cup with handle! Material: Stainless steel + plastic Size: 40oz Lid type: Screw-on Available colours:- White gloss Suitable for hot and cold drinksDo not use the plastic straw with hot drinks Pressing instructions for the sublimation cup Tumbler press: 180C, 60sec Convection oven: 180C, 4min In case the screws get stuck, use a small, flat object to leverage the screw while unscrewing the handle. Suitable for:- Sublimation (all colours)- Vinyl- UV DTFWARNING!!Use protective equipment as necessary. We recommend using heat-resistant gloves as some of the products might be very hot after sublimation. Occasional small blemishes may appear on any of the products, which is normal and happens due to small dust particles getting attached to the surface during the coating process.

Read more less

20oz leakproof sublimation cups Features:- Leakproof lids (you can take them with you wherever you go!)- Built-in straw (no need to carry one around with you)- Double-walled design (keeps your drinks cool for longer) Cold drinks only!Not suitable for hot drinks due to the built-in plastic straw Material: Stainless steel, plastic Capacity: 20oz Lid type: Screw-on Available colours:- White - White + Pink - White + Black Finish: Glossy / Shimmer Pressing instructions: Convection oven: 185C, 4minWARNING!!Use protective equipment as necessary. We recommend using heat-resistant gloves as some of the products might be very hot after sublimation.

Read more less

8inch sublimation wind spinners These beautiful wind spinners come blank and can be personalised on both sides. After sublimation, you can spread each part of the spinner to form a desired shape. Each wind spinner comes with a hook. Material: Aluminium Pressing Instructions:Temperature: 385F / 196CTime: 60secBefore sublimating, please check whether the spinner has a protective foil and remove it from both sides before sublimating.

Read more less

10inch sublimation wind spinners These beautiful wind spinners come blank and can be personalised on both sides. After sublimation, you can spread each part of the spinner to form a desired shape. Each wind spinner comes with a hook.Material: Aluminium Equipment required: Flat heat pressPressing Instructions:Temperature: 385F / 196CTime: 60secBefore sublimating, please check whether the spinner has a protective foil and remove it from both sides before sublimating.

Read more less

16oz stainless steel sublimation tall can LAST STOCK! Unfortunately, our supplier has stopped producing these and therefore, there will be no more restocks. This sublimation can comes with a clear lid and a clear plastic straw. For coloured lids and straws please click here You can also purchase sublimation straws hereMaterial: Stainless steel Size: 16oz Approx. measurements16.5cm height 7.2cm diameter Printing area: 14.5cm x 23.3cm Lid type: Push-on Do not use the plastic straw for hot drinks Equipment required: Convection oven / air fryer Pressing instructions: Convection oven: 185C, 6min Suitable for:- Sublimation - Vinyl- UV DTFWARNING!!Use protective equipment as necessary. We recommend using heat-resistant gloves as some of the products might be very hot after sublimation. Occasional small blemishes may appear on any of the products, which is normal and happens due to small dust particles getting attached to the surface during the coating process.

Read more less

Pack of 10 x 16oz stainless steel sublimation tall can LAST STOCK! Unfortunately, our supplier has stopped producing these and therefore, there will be no more restocks. These sublimation cans come with a clear lid and a clear plastic straw each. For coloured lids and straws please click here You can also purchase sublimation straws hereMaterial: Stainless steel Size: 16oz Approx. measurements16.5cm height 7.2cm diameter Printing area: 14.5cm x 23.3cm Lid type: Push-on Equipment required: Convection oven / air fryer Do not use the plastic straw for hot drinks Pressing instructions: Convection oven: 185C, 6min Suitable for:- Sublimation - Vinyl- UV DTFWARNING!!Use protective equipment as necessary. We recommend using heat-resistant gloves as some of the products might be very hot after sublimation.

Read more less

Pack of 10 unisex grey sublimation t-shirtsThese amazing t-shirts are very elastic and comfortable to wear. Forget about the dull, see-through t-shirts! These t-shirts are soft and durable. When sublimated, they provide very vivid colours which DO NOT fade with washing. Each pack comes with 10 mixed-sized t-shirts (random allocation).Please message us if you need any particular sizes. Material: 95% Polyester, 5% Elastane (cotton feel)Fit: Slim / Regular Equipment required: Flat heat pressSuitable for: - Sublimation - HTVPressing Instructions:Time: 60secTemp: 180CT-shirt measurements with an approximate UK size equivalent*Please allow 1-2cm variation Please note that the colour may differ slightly from t-shirt to t-shirt! Please note that any orders that include a mix of both, ready-to-ship as well as pre-order items, will be dispatched once all items from your order are available.

Read more less

16x 40oz Gen 2 white sublimation dupe Now sold at £7.50/pc due to the frequent appearance of blemishes / defects on the cups. Examples shown on the photos, but please note these are not limited to those shown and your cups may have some other faults or they may not have any at all. We are unable to go through every single cup we currently have in stock and purchasing these, you are doing so with a full awareness of the potential faults. No refunds or returns will be accepted on these. REDUCED TO CLEAR Features:- Spill-proof screw-on lid- Double-walled design - BPA free- Stainless steel- Improved design for higher comfort Material: Stainless steel, plastic Size: 24.5cm x 9.9cm (excl. lid and handles) Capacity: 40oz Finish: Glossy What’s included: 16x 40oz Gen 2 white sublimation dupe16x Plastic straw Pressing instructions:

Read more less

2in1 sublimation tumbler with a glass 15oz sublimation tumbler (tapered) with a 25oz glass + 1x leakproof lid + 1 plastic straw for the glass.These can be used together or separately as 2 cups. To sublimate the 15oz metal tumbler you will need an air fryer or an oven. Material: Stainless steel Size: 15oz and 25oz Lid type: Push-on Suitable for hot and cold drinksDo not use the plastic straw for hot drinks Equipment required: air fryer / oven Pressing instructions: Air fryer / oven: 185C, 6min Suitable for:- Sublimation- Vinyl- UV DTFWARNING!!Use protective equipment as necessary. We recommend using heat-resistant gloves as some of the products might be very hot after sublimation. Occasional small blemishes may appear on any of the products, which is normal and happens due to small dust particles getting attached to the surface during the coating process.

Read more less

Sublimation Bunny-eared bags THIS IS A BAG ONLY! These Bunny-eared bags are so much thicker than those of other suppliers! You can recognise this higher quality version by the differently sawn ears. Material: Linen/PolyesterSize: H25cm x W30cm x D20cmEquipment required: Flat heat pressSuitable for: - Sublimation- HTV Pressing instructions: Heat Press: 365F, 60sec

Read more less