2x 16oz frosted beer mug Material: GlassSize: 16ozEquipment required: convection oven / mug pressSuitable for: - Sublimation - Vinyl - UV DTF Pressing instructions: Mug / Tumbler press: 180C, 3min Convection oven: 180C, 4minWARNING!!Use protective equipment as necessary. We recommend using heat-resistant gloves as the product will be very hot after the sublimation.Hand washing only.As with all glass products, avoid extreme temperature changes, as this may cause cracking or even explosion of the glass. Occasional small blemishes may appear on any of the products, which is normal and happens due to small dust particles getting attached to the surface during the coating process.

Read more less

20oz matte sublimation tumbler with swing handle 20oz leakproof sublimation tumbler with secure screw-on lid, swing carry handle, and double-wall stainless-steel design. Premium sublimation coating ensures consistent, high-quality prints. Ideal for hydration-focused product lines, corporate branding, and volume production. This bottle is insulated which means it will keep your drinks cold for longer. This is an upgraded version of our 20oz sublimation tumblers:✅ Higher quality coating✅ Upgraded lid✅ Leakproof Not suitable for hot drinks Material: Stainless steel Size: 20oz Finish: Matte Lid type: Screw-on Please be aware that the colours may vary slightly depending on the lighting and the settings of your device's screen. Suitable for:- Sublimation (all colours)- Vinyl- UV DTFEquipment required: Mug press / 3d vacuum oven / convection oven Pressing instructions: Tumbler press: 356F, 60sec Convection oven: 375F, 6minPlease be aware that the colours of the design may show slightly different on coloured products.WARNING!!Use protective equipment as necessary. We recommend using heat-resistant gloves as some of the products might be very hot after sublimation. Occasional small blemishes may appear on any of the products, which is normal and happens due to small dust particles getting attached to the surface during the coating process.

Read more less

16x 40oz Gen 2 white sublimation dupe Now sold at £7.50/pc due to the frequent appearance of blemishes / defects on the cups. Examples shown on the photos, but please note these are not limited to those shown and your cups may have some other faults or they may not have any at all. We are unable to go through every single cup we currently have in stock and purchasing these, you are doing so with a full awareness of the potential faults. No refunds or returns will be accepted on these. REDUCED TO CLEAR Features:- Spill-proof screw-on lid- Double-walled design - BPA free- Stainless steel- Improved design for higher comfort Material: Stainless steel, plastic Size: 24.5cm x 9.9cm (excl. lid and handles) Capacity: 40oz Finish: Glossy What’s included: 16x 40oz Gen 2 white sublimation dupe16x Plastic straw Pressing instructions:

Read more less

20oz sublimation water bottle This leakproof water bottle is the perfect product for those who are always on the move!It comes with a very comfortable to hold silicone handle and a dust cover to protect the flip straw. This bottle is insulated which means it will keep your drinks cold for longer.Not suitable for hot drinks due to the plastic straw. Material: Stainless steel Size: 20oz Finish: Glossy Lid type: Screw-on Suitable for:- Sublimation (all colours)- Vinyl- UV DTF Equipment required: Convection oven Pressing instructions:180C, 4min WARNING!!Use protective equipment as necessary. We recommend using heat-resistant gloves as some of the products might be very hot after sublimation. Occasional small blemishes may appear on any of the products, which is normal and happens due to small dust particles getting attached to the surface during the coating process.

Read more less

2in1 sublimation tumbler with a glass 15oz sublimation tumbler (tapered) with a 25oz glass + 1x leakproof lid + 1 plastic straw for the glass.These can be used together or separately as 2 cups. To sublimate the 15oz metal tumbler you will need an air fryer or an oven. Material: Stainless steel Size: 15oz and 25oz Lid type: Push-on Suitable for hot and cold drinksDo not use the plastic straw for hot drinks Equipment required: air fryer / oven Pressing instructions: Air fryer / oven: 185C, 6min Suitable for:- Sublimation- Vinyl- UV DTFWARNING!!Use protective equipment as necessary. We recommend using heat-resistant gloves as some of the products might be very hot after sublimation. Occasional small blemishes may appear on any of the products, which is normal and happens due to small dust particles getting attached to the surface during the coating process.

Read more less

24x 16oz frosted beer mug Comes with FREE shipping All beer mugs are packed in twos. Therefore, you will receive 12 boxes of 2-pack beer mugs, total 24 beer mugs. Material: GlassSize: 16ozEquipment required: convection oven / mug pressSuitable for:  - Sublimation - Vinyl - UV DTF Pressing instructions: Mug / Tumbler press: 180C, 3min Convection oven: 180C, 4minWARNING!!Use protective equipment as necessary. We recommend using heat-resistant gloves as the product will be very hot after the sublimation.Hand washing only.As with all glass products, avoid extreme temperature changes, as this may cause cracking or even explosion of the glass. Occasional small blemishes may appear on any of the products, which is normal and happens due to small dust particles getting attached to the surface during the coating process.

Read more less

20oz sublimation tumbler - Flat Edge (Multi-pack) Please note that the metal straws and brushes are NOT to be purchased seperately. Features:- Leakproof push-on lid- Double-walled design - BPA free- Stainless steel- Flat bottom for a better printing experience Material: Stainless steel, plastic Size: 20.5cm x 7.3cm Capacity: 20oz Finish: Glossy Pressing instructions:

Read more less

15oz sublimation tumbler - Flat Edge (Multi-pack) Each tumbler comes with a plastic straw and a rubber pad Features:- Leakproof push-on lid- Straight skinny design- Flat edge - Double-walled - BPA free- Stainless steel Material: Stainless steel, plastic Size: 16.5cm x 7.3cm Capacity: 15oz Finish: Glossy Pressing instructions:

Read more less

12oz sublimation tumbler (Multi-pack) Features:- Leakproof push-on lid- Double-walled design - BPA free- Stainless steel Each tumbler comes with a clear plastic straw and a rubber pad. Suitable for hot and cold drinksDo not use the plastic straw with hot drinks Material: Stainless steel, plastic (lid & straw) Size: 13cm x 7.3cm Capacity: 12oz Finish: Glossy Suitable for:- Sublimation- Vinyl- UV DTF Pressing instructions:

Read more less

20oz sublimation travel mug (Multi-pack) Click here for a template This leakproof, insulated travel mug is the perfect solution for those always on the go! It can hold hot and cold drinks and comes with a screw-on lid which can be used with or without a straw (straw included).These are double-walled and will keep your drinks boiling hot for 3-4 hours, after which you can start drinking!This tumbler comes with a convenient to hold strap. It is not a wrist strap as it's only about 7.5cm long so you wouldn't be able to put an adult's hand through it. Features:- Leakproof screw-on lid- Double-walled design - BPA free- Stainless steel Material: Stainless steel Size: 20oz Height (without lid) 17.5cm Diameter (top) 9cm Lid type: Screw-on Available colours:- White Suitable for hot and cold drinksDo not use the plastic straw for hot drinks Equipment required: air fryer/ convection oven / halogen oven Pressing instructions: Convection oven: 356F, 4min (rotating half-way through)

Read more less

16oz stainless steel sublimation can (Multi-pack Each can comes with a matching lid and plastic straw (unless otherwise stated). All colours are suitable for sublimation. If you want to add coloured lids to the white can, click hereMaterial: Stainless steel Size: 16oz Approx. measurements15cm height 7.8cm diameter Printing area: 12.5cm x 24.7cm Lid type: Push-on Do not use the plastic straw for hot drinks Tutorial link Equipment required: Convection oven / air fryer Pressing instructions: Convection oven: 185C, 6min Suitable for:- Sublimation - Vinyl- UV DTF

Read more less

30oz Sublimation Tumbler with swing handle (Multi-pack) 30oz leakproof sublimation tumbler with secure screw-on lid, swing carry handle, and double-wall stainless-steel design. Premium sublimation coating ensures consistent, high-quality prints. Ideal for hydration-focused product lines, corporate branding, and volume production. This bottle is insulated which means it will keep your drinks cold for longer. This is an upgraded version of our 30oz sublimation tumblers:✅ Higher quality coating✅ Upgraded lid✅ Leakproof design No more greyish look or lost rubber stoppers. Click here for a template Not suitable for hot drinks due to a plastic straw Material: Stainless steel Size: 30oz Lid type: Screw-on Available colours:-WhitePlease be aware that the colours may vary slightly depending on the lighting and the settings of your device' screen. Suitable for:- Sublimation - Vinyl- UV DTFEquipment required: 30oz tumbler press / 3d vacuum oven / convection oven Pressing instructions: Tumbler press: 356F, 60sec Convection oven: 375F, 6minPlease be aware that the colours of the design may show slightly different on the coloured products.WARNING!!Use protective equipment as necessary. We recommend using heat-resistant gloves as some of the products might be very hot after sublimation. Occasional small blemishes may appear on any of the products, which is normal and happens due to small dust particles getting attached to the surface during the coating process.Please note that any orders that include a mix of both, ready-to-ship as well as pre-order items, will be dispatched once all items from your order are available.

Read more less